Rubber Sheets

Products » Rubber Sheets » EPDM Rubber Sheets

 
 

EPDM RUBBER SHEETS

EPDM or Ethylene Propylene Diene Monomer can be vulcanized by using conventional method of using sulphur or by dicumyl peroxide (DCP). It has an excellent operating temperature range of -45°C to + 120°C.It is highly recommended for out door uses as it extremely resistant to oxidation, U.V. Rays and Ozone due to its highly saturated polymer chain. However, EPDM does not have good oil resistance or adhesion properties. It is resistant to many chemicals and solvents and shows good resistance to many corrosive chemicals. It is impermeable to water and is used as roofing sheet and waterproffing membrance.

 

EPDM RUBBER : BLACK (100% EPDM)
Code Specific
Gravity		 Hardness
(±5)		 Tensile
Strength		 Elongation
at break		 Tear
Strength		 Compression Set
at 70°C for 22 hrs		 Working
Temp.
g / cm3 Shore A (min)
kg / cm2		 (min)
%		 kg / cm % °C
Range
EP 50120 1.20 50 90 450 20 40 -40/115
EP 60110 1.15 60 100 350 30 25 -40/140
EP 65120 1.25 65 80 250 25 30 -40/140

 
COMMERCIAL EPDM
Code Specific
Gravity		 Hardness
(±5)		 Tensile
Strength		 Elongation
at break		 Tear
Strength		 Compression Set
at 70°C for 22 hrs		 Working
Temp.
g / cm3 Shore A (min)
kg / cm2		 (min)
%		 kg / cm % °C
Range
EP 40110 1.10 40 90 500 20 35 -40/110
EP 65130 1.35 65 60 250 18 35 -40/100
EP 70130 1.35 70 50 300 20 40 -40/100
EP 60125 1.25 65 60 250 20 35 -40/120
 
Standard Length 10 Mtr 10,000mm 33ft 11 yard
Standard Width 1.2 / 1.4 / 1.5 mtr 1200 / 1400 / 1500mm 4 / 4.6 / 4.92ft 1.33 / 1.53 / 1.64 yard
Standard Thickness 1 - 50 mm 1/32" - 2"
Form
Colors