Ceramic lagging rubber sheet with chloroprene bonding layer is used as protective surface to improve and extend pulley life in applications for extreme conditions in wet and muddy areas. Zenith Rubber has developed high quality ceramic lagging with chloroprene bonding layer for easy and quick installation.
Zenith’s ceramic lagging is made with high quality alumina tiles, high quality abrasion resistant rubber and backed with chloroprene bonding layer.
The USP of Zenith’s Ceramic Lagging is its 500mm width and 10 Meter Length.
|Aluminum Oxide Al2O3||92 % (min)|
|Density (g/cc)||3.65 (min)|
|Hardness (R45N)||77 (min)|
|Flexural Strength (Mpa)||240 (min)|
|Abrasion By Rubbing (g)||0.1 (max)|
|Hardness (Shore ‘A’)||65+/-5|
|Density (g/cc)||1.12 to 1.17|
|Tensile Strength (Mpa)||20.0 (min)|
|Elongation (min)||400% (min)|
|Abrasion (mm3)||120 (max)|
|>Custom width and length is available on request|
|>Custom colours available on request|
Comparison Table for Co-efficient of Friction
|Co -efficient of Friction||Rubber Lagging||Ceramic Lagging|