Ceramic Wear Pads
CERA-WEAR Ceramic Wear Pads are a premium grade, composite liner of wear resistant, 92% alumina ceramic tiles, vulcanised to an impact resistant rubber backing. This tile has excellent resistance to high speed wet slurry and fine particle sliding abrasion.
CERA-WEAR Ceramic Wear pads are supplied with a specially formulated Neoprene based CN Bonding Layer to achieve ultimate adhesion when bonded to steel or other rubber surfaces. For Extremely abrasive material, Zenith offers Ceramic Wear Pads bonded with steel plate of thickness 3mm to 10mm
CERA-WEAR Ceramic Wear Pads are supplied with the tiles flush and without gaps to eliminate the possibility of materials wearing between them. The rubber backing gives the pad moderate impact resistance and flexibility for installation on flat surfaces, making them suitable for wear protection ceramic lining applications which require a full 100% ceramic surface.
|Code||Thickness (mm)||Width (mm)||Length (mm)|
|ZenC Pad A||8||500||500|
|ZenC Pad B||14||500||500|
|ZenC Pad C||20||500||500|
|ZenC Pad D||30||500||500|
- CERA-WEAR Ceramic Wear Pads have been designed primarily for use as a ceramic lining for the wear and corrosion protection of steel surfaces.
- It’s mainly used for high speed wet abrasion applications such as slurry handling in the mineral processing industry but can be used for any fine particle abrasion applications.
|Aluminum Oxide Al2O3||92 % (min)|
|Density (g/cc)||3.65 (min)|
|Hardness (R45N)||77 (min)|
|Flexural Strength (Mpa)||240 (min)|
|Abrasion By Rubbing (g)||0.1 (max)|
|Hardness (Shore ‘A’)||65+/-5|
|Density (g/cc)||1.12 to 1.17|
|Tensile Strength (Mpa)||20.0 (min)|
|Elongation (min)||400% (min)|
|Abrasion (mm3)||120 (max)|
|>Custom width and length is available on request|
|>Custom colours available on request|