Diamond Lagging Rubber Sheets
Lagging is the term used to describe the application of a coating, cover or wearing surface which is sometimes applied to Diamond shells. Lagging is often applied in order to extend the life of the shell by providing a replaceable wearing surface or to improve the friction between the belt and the Diamond. Notably drive Diamonds.
Diamond lagging rubber sheets are used to eliminate belt slippage, increase Diamond life, improve water shedding and boost productivity.
| Diamond Lagging Rubber Sheets | |
| Features | Gutter less design for cleaner compatibility reduces belt vibration and cleaner chatter for standard applications with minimal slippage. |
| Applications | To help eliminate slippage, increase Diamond life and to improve production. |
| Finish Type | Square and diamond design Diamond lagging sheet |
| Standard Thickness | 6 mm to 40 mm |
| Standard Length | 10 Mtr, 33 Ft, 11 Yard |
| Standard Width | 1.2 / 1.4 / 1.5 Mtr, 48" / 54" / 60" inches |
| Color |
|
| Technical Specification: | ||||||
| Code | Specific Gravity | Hardness (+/- 5) | Tensile Strength | Elongation | Abrasion | Temperature |
| Gm/cm3 | Shore A | Kg/cm2 | % | mm3 | °C | |
| STANDARD | ASTM D297 | ASTM D2240 | ASTM D412 | ASTM D412 | ASTM D5963 | --- |
| ABE 55120 PL | 1.25 | 55 | 60 | 350 | 280 | -25 to +70 |
| ABE 60120 PL | 1.25 | 60 | 70 | 350 | 250 | -25 to +70 |
Technical Diaphragm
| >Custom width and length is available on request |
| >Custom colours available on request |